Some key points about anti-static flooring

Ceramic anti-static flooring is made with anti-static tiles as the surface layer, combined with all-steel flooring or cement particleboard, and the edges are sealed with conductive rubber strips (ceramic flooring without rubber strips is prone to falling off when bumped). It features stable anti-static performance, environmental friendliness and fire resistance, high wear resistance, long service life (over 30 years), high load capacity (uniform load of over 1200kg/m2), water and moisture resistance, and good decorative effect. It is suitable for all kinds of computer rooms. The drawback is that the floor itself is relatively heavy (more than 15 kilograms per layer), which has a certain impact on the floor's load-bearing capacity. In addition, it needs to be installed by professional installers; otherwise, the installation will be uneven.

The all-steel anti-static floor uses high-wear-resistant melamine HPL fireproof board or PVC as the surface layer (in northern regions, due to the dryness of the all-steel anti-static floor, it is not easy to use HPL fireproof board for decoration), and the steel shell structure base material. Depending on whether there is black tape or not, there are also edgeless and edge points. The advantages of all-steel flooring are that it is easy to install, there will be no gap problems after installation, and it is convenient to replace. The drawback is that the surface material is not wear-resistant, has a short service life, is prone to peeling and warping, and needs to be replaced after a few years.

The aluminum alloy anti-static floor products are made of cast aluminum profiles, formed by stretching, and the surface layer is made of high-wear-resistant PVC or HPL single plates, with conductive adhesive adhered. It has the effect of the base material not rusting multiple times, effectively solving the product defects of composite floors and all-steel floors. However, custom-made anti-static floors are too expensive.

The functions of anti-static flooring

Eliminate the harm of exposed cables to the human body. The adjustability of the anti-static raised floor can be used to eliminate the roughness of the real floor and ensure the overall levelness of the computer room floor. 3. Static charges will leak to the ground and reflect electromagnetic radiation.

Maintenance requirements for anti-static floors

Clean regularly with a neutral detergent or the cleaning method provided by the manufacturer. Under normal circumstances, the surface should be cleaned after work every day, and deep cleaning should be carried out once a month. If it is used frequently, the cleaning frequency should be appropriately increased. 2. Regularly check the floor grounding to ensure the anti-static function is normal. 3. Use special anti-static shoes to ensure performance and protect the floor. 4. Regularly apply anti-static wax water to the floor surface to prevent contaminants from corroding the floor.

Special requirements for anti-static floors that need special attention:

Don't wipe the floor with sharp objects. If there is no protective cover, it is very easy to damage the floor. 2. Do not press the floor with heavy objects, especially the raised floor. If it is really necessary to use it, protective steel plates can be used as the backing. 3. Do not use highly corrosive cleaning products to avoid damaging the floor material. 4. Clean up solvent stains or water dripping on the floor surface in time